Wicked How-To's

How to do weird stuff (and occasionally something useful)…

Wicked How-To's header image 2

How To Build A Long Bow–Make Your Own English Longbow at Home

August 26th, 2007 · 90 Comments

Throughout history the bow has been used for hobbies, course competitions, Olympics, hunting, fishing, big game, small game and for birds of flight. They have also been used as offensive and defensive weapons of war and one time to win freedom.

No other weapon had the versatility and world wide impact as the bow. Today there are three types of Bows made: the Recurve Bow, the Long Bow, and Compound Bow. These bows are typically made in shops and in factories. There is also a special type of bow called

the Self-Bow (or Stick Bow). A Self-bow (See Fig. 1) is a bow made fr-om a single piece of wood shaped by an experienced craftsman, named a Bowyer. At times, extra material like horn nocks on the ends or a built up handle are accepted as part of a self-bow.

The Recurve Bow

The Recurve Bow fits the image most common today of what a bow should look like. There are many variations to the Recurve bow but they all have the same style. The recurve curves away fr-om the holder. If you notice the Long Bow, it only curves one way; whereas the Recurve curves like a long bow but then curves back, thus the recurve. Many people seeing a Recurve Bow strings it backwards and when they try to use it, it breaks.

The Recurve Bow

The Longbow

Here’s a great video clip showing how a professional bowyer constructs a longbow (fr-om the show How It’s Made):

The longbow is the most basic bow. It is shaped fr-om

one piece of wood and the grip is normally made using a strip of leather wound around the bow. A small shelf is cut into the side of the bow for the arrow to rest on. There is no bow sight. Shooting is accomplished by aiming with the tip of the arrow at full draw pointing at the target. Shown below is another example of a longbow.

The Long Bow


The Compound Bow

Compound bows are produced exclusively in factories. A compound bow is a modern bow that uses a system of cables, cams and pulleys to draw the limbs back. The limbs of a compound bow are much more rigid than the limbs of a recurve or longbow. This enables the bow to store more energy and to release it quicker and faster than a normal bow. Compound bows vary in length, with end to end (nocks) measurements of 33 to 48 inches. The shorter length is for young shooters, and the longest is for adult use. The compound bow uses eccentric wheels at the end of both limbs to create its power. The bow string itself is connected to the ends of the steel cables, which are attached to the top and bottom wheels. The draw weight is adjustable within a 15 pound range by adjusting the bolts on each limb.

The Compound Bow

The Cross Bow is illustrated for example only and in many states is considered a weapon similar to a pistol or rifle.

The Cross Bow

A Bowyer is a person who makes bows for archery competition or sport. The term bowyer typically implies a skilled craftsman. Laminated bows, or composite bows, the forms are commonly used for include Recurve Bows and Compound Bows.

The most important part of making a bow is ensuring the materials used are not strained past the breaking point. Due to the large amount of energy stored in a pulled bow, failures often occur especially when using inferior materials or unskilled bowers. Quite often when a bow fails, because there is a lot of stored-up energy, when it fails, it sounds like an explosion because of the loud cracking and some flying debris, including parts of the bow itself.

The choice of making a Long Bow, Recurve Bow or

a Compound Bow is up to you. Try all three types of bows if you have the chance before you start building one. Using a Recurve Bow is more the accepted traditional method. It has fewer moving parts to adjust and it is easier to tune and maintain. Its main disadvantage is the pull force. The full force of

the bow is held at full draw only by your fingers so some strength training is needed to control draw force.

Using a Compound Bow is a bit more modern. Its advantage is the let off at full pull. The less effort allows the hold at full pull at the use of a mechanical trigger. It also has more moving parts and a bear to setup and tune.
The two key factors that affect the choice are the size and strength of the bow and are measured by Draw Length and Draw Weight. Draw length should be measured fr-om the nock to the lead edge of the riser at full pull. Draw weight for a Recurve Bow is usually marked on the bottom limb, at a standard draw of 28 Inches.

Recurve Bows range form 48 inches to 70 inches long. Most target bows will average about 66 inches in length. The rough guide to select the length of a bow to fit you; someone with a draw length of less than 28 inches should use a bow between 62 & 66 inches. A person with a draw of more than 28 inches should use a bow between 66 & 70 Inches. The draw weight of the bow is written on the lower back limb. The weight is noted in pounds at full draw of 28 inches and looks like this: #20@28. Twenty pounds of pull at 28 inch pull. Which means at a full pull of 28 inches the force required to hold the bowstring at this length will be 20 pounds. All bows made today use the same basic principles for construction.
For this exercise we will be building a Long Bow

How to make a long bow

Method

In order to make your longbow, you will need to start with a stave of wood (dimensions 1.5″ x 1.5″ x the height of the intended user. The traditional wood for making a bow is yew, for my bows I used ash and it was the easiest wood for me to find. The stave itself can be bought fr-om a supplier, if however you plan to cut it yourself the easiest way is to split a log into quarters, you need to make sure you have a mix of both sap wood and core wood. If available yew wood is the best wood for long bows.

Once you have the stave (the part that will become the back) of the bow was the part that had the bark on it. CAUTION the bark will need to be removed without cutting the wood underneath.
Once this has been decided, you need to mark the stave see figure below and trim off the grey, shaded area using an axe, knife or saw:

 

In this diagram, the back of the bow is the bottom line of the stave. The length of the ends of the bow is ½” and the height at the mid point is whatever feels comfortable in your hand. However the thicker you make the bow the higher the poundage, I would also recommend that you make it slightly thicker than you think you’ll need it, you can always cut it down.
On the back of the bow, find the mid point of the center line and mark it then draw a straight line fr-om there to each end of the bow. Fr-om the end of these lines, mark 3/16″ either side of the back of the stave, and link them with the ends of the middle line. Trim off shaded area.

 

On this diagram, you are making the points on the back of the bow. The marker line at the left end of the diagram is 3/16″ and the one on the right is 3/8″. I would recommend using charcoal to do just remember to remove it later.

Now that you have a basic bow shape, you need to trim off the corners of the stave to give a more rounded shape. This is best done with a spoke-shave or a plane. In cross section, this is roughly the shape that you’re after, (remove the shaded areas).

 

While trimming the bow to match the diagram above, you should ensure that no bulges or dips occur along the length of the bow. To accomplish this, continually look down the length of the bow, working forward as you do. If bulges do occur, smooth them off by light sanding, if dips occur you will need to trim the entire bow to remove them.
It is vital that you try to keep the shape of the bow uniform on both sides at all times; otherwise the bow will not pull correctly.

Once you have reached a stage that you are satisfied with, test the flex of the bow by placing one end on the instep of your foot, your opposite hand on the other end, and pulling the middle towards you with your other hand. Ensure that the back of the bow is facing away fr-om you. As you do this, you will notice some stiff areas of the bow (sometimes it’s easier to get someone else to do this because they can get a better view). Do not try to flex the bow to far as this point, this is not the direction the bow will be bent when strung, this is just to see how much give there is in the wood. Trim down these stiff areas so that the bow flexes evenly up and down its length.

Once you are satisfied that your bow is even and flexes nicely, make some nocks on either end to hold the string. These should be around 2″ fr-om the ends of your bow and are best made using a round needle file. Starting with the side of the bow, make a small mark at 45 degrees, so that the top of the mark is towards the end of the bow see diagram.

 

Repeat this on the other side of the same end of the bow, and then join them. (See below) Repeat this at the other end of the bow. You could also put horn nocks on the ends, you can purchase these or you can make by hand.

 

Now that you have created the bow and put nocks on it, you need to teach the wood to bend. This is very important, because if you don’t teach the wood to bend the first time you draw the bow it will snap (LOUDLY).

To teach the wood to bend, you will need to put a string on your bow that is NOT under tension. (See below) and use a tiller see instructions below to make one.

The way a tiller works, is the bow is placed into the space at the top so that it is horizontal with the back, of the uppermost part of the bow. Then pull the bow string slowly down to the first notch. While the string is in this position, examine the bow checking that it is not pulling to one side and that the overall curve is smooth with no straight areas. Mark these stiff areas with a bit of charcoal, gently release the string to its natural position remove the bow fr-om the tiller unstring it and trim the areas marked with charcoal.

Restring the bow put it back onto the tiller and take it to the first notch again. Repeat this as many times a necessary until no stiff areas remain on the bow and the bow curves smoothly. Once you are satisfied take the string to the next notch and perform the same checks/actions.

It is a good idea to let the wood rest for about 15-20 minutes between visits to the tiller so that the sinews within the wood do not start to break.

Once you have reached the fourth notch on the tiller, you can add a little bit of tension to the string. Repeat the slow progression through the notches of the tiller, checking for and trimming any stiff areas until you once again reach the fourth notch. It is very important that these stages are not rushed, or the wood will strain too quickly, the sinews will start to snap and your bow will not reach its full potential or will simply break in half.

Again add a little more tension to the string repeat the checking until you reach the fourth notch. At this point you can put the string under full tension (see below) and work down the tiller. Once you have reached the draw you required for your bow you can put a couple coats of boiled linseed oil on it to protect it fr-om the weather.

Tensioning the Bow

To have a string that is not under tension, simply extend the string so that it is firmly attached in the nocks at both ends of the bow, but the wood itself does not bend.

Tension can be increased by slightly shortening the string, so that the bow bends a little when strung. It is best to shorten the string an inch at a time to increase the tension slowly.

When the bow is at full tension, the distance between the middle of the bow (i.e. where you hold it) and the bowstring, should be the same as your clenched fist with the thumb stuck out.

Bow Strings

When buying bow strings, it is important to remember that three main types are available. These are no loops, one loop and two loops. Personally I have found that one loop strings are best because it is possible for the archer to set the length of the string to be perfect length for their own use. To tie the second loop (for the bottom of the bow) you will need to use a bowers knot (see below). But I prefer to make my own strings.

Testing the Poundage

To test the poundage of a bow, attach a fishing scale to the string while the bow is on the tiller and slowly add weights to it until the string reaches the draw that you require. This will give you the X pounds draw at Y inches required when checking your bow for competition or combat.

If the finished bow is a higher poundage than your require (i.e. you want to use it in combat and it’s too strong), then evenly trim the bow and go back through the routine of checking it on the tiller. On the tiller you will need to draw the bow an inch further than your draw length, this is to ensure that when you fully draw the bow it will not snap.

Making a Tiller

A tiller is the piece of equipment used to train the bow to bend without breaking. It is a vertical piece of wood with a number of notches cut into it at fixed intervals with a semi circle cut out at the top which the bow can rest in. The whole thing is supported on a suitable base.

Bellow is a guide to making a permanent tiller, however you can make them simply fr-om a piece of scrap wood, and this would be cut in accordance to the instructions below and then held in a vice.

 

To make a tiller you will need a hardwood plank (1.5″ x 2″ x 8′) and either screws or dowels to join the pieces together.

 

The first notch should be 7.5″ fr-om the top of the tiller. There should be a distance of 1.5″ between the top of one notch and the top of the next notch and enough notches to draw it to your draw length.

 

Join all the pieces together as per the diagram above, except for the 1.5″ x 1.5″ block which is tied onto the base piece to prevent the arm fr-om falling over. If this piece is attached, then the tiller will not fold flat.

Safety Tips for Long Bow handling

  • Always remember that a loaded bow is a deadly weapon
  • Never show your skill by using a human target or permit someone to hold a target for you
  • Be sure no one is standing in front of or to the sides of the archer while bow is drawn
  • Shoot only at the target. Try first shots at closer distances until comfortable
  • Never use arrows that are too short
  • Replace bowstring when it becomes worn or frayed
  • Always sting your bow properly
  • Always use finger and arm protectors
  • Never use a target that cannot stop an arrow

Congratulations, you have made your first bow, go out and enjoy it.

Additional Resources and Further Reading

The very first thing I’d recommend you do if you’re serious about bow-making is pick up a copy of Traditional Bowyers Encyclopedia: 2nd Edition (you can get it here fr-om Amazon for a nice discount) by Dan Bertalan, it really is not only THE bow-building encyclopedia, but it’s precisely what you need if you’re just getting started, it’s an excellent guide. Another excellent series of books (there are 4 volumes) I recommend is Jim Hamm’s “The Traditional Bowyer’s Bible”, here’s volume 1 (Amazon has all 4 volumes): The Traditional Bowyer’s Bible, Volume 1.

Excellent Article on ‘How to make a bow’ (I think it’s a recurve) at WikiHow

‘How to make a composite longbow’, again fr-om WikiHow

Manual for building a 40lb pull long bow

Tags: Sports & Outdoor

90 responses so far ↓

  • 1 Sam Green // Aug 30, 2007 at 9:59 am

    kool…. i wish i had that equipment……

  • 2 Datus // Sep 16, 2007 at 4:36 pm

    Aren’t you supposed to dry the staves after they are cut? If so, how do you prepare the wood for drying and how long should you let them stand?

  • 3 wiggity // Sep 16, 2007 at 6:38 pm

    Sweet, i see how to do it now but all i can find is an odd tree that bends and flewes well. i made a 15lb bow out of it and it can fly 52 paces with a homemade nail tippped arrowA!

  • 4 peter o'niel // Oct 4, 2007 at 11:39 am

    it was very helpful and useful. thanks for it and the other videos. bye, your mate, Pete

  • 5 Adam // Nov 2, 2007 at 12:35 pm

    How do you build a catapult for a school project?

  • 6 Evil5partannnn // Dec 19, 2007 at 10:25 pm

    :shock: :shock: :shock: :shock: :arrow: :arrow: :arrow: :arrow: :shock: :shock: :shock: :shock:

    nice tutorial. im lookin forward to makin’ one…

  • 7 John // Feb 3, 2008 at 5:09 pm

    Thanks it was great I read this and went straight to the lumber store to pick up some ash. I made one with a 40lb drawback.

  • 8 warren ansell // Feb 15, 2008 at 4:57 am

    i am glad i have linaly found somebody with planes

  • 9 Anonymous // Feb 20, 2008 at 10:09 am

    :mrgreen:
    HIMP!

  • 10 monkeys // Feb 20, 2008 at 10:56 am

    hi

  • 11 ruben vanhoutte // Feb 21, 2008 at 1:58 pm

    hello my name is ruben i have a question : how do you make a katapult with al long range of fire
    ps( i really like that video) bye!! :razz: :mrgreen:

  • 12 Anonymous // Mar 11, 2008 at 10:28 pm

    jh

  • 13 NMKHJ // Mar 15, 2008 at 11:12 am

    YOU NOB :twisted: :mad: :evil:

  • 14 Anonymous // Mar 21, 2008 at 5:43 pm

    wow thats mad, caveman?

  • 15 Anonymous // Mar 31, 2008 at 9:17 pm

    :arrow: :twisted: :mrgreen:

  • 16 Nelson // Apr 8, 2008 at 3:18 am

    this is very useful for me because I am eager to do the bow

  • 17 Freelancer // Apr 9, 2008 at 1:24 am

    Awesome, i have just made one, still got to fine tune it a little and its only a short bow…
    For all you Australians, Pine works fine, just dont expect a massive drawback and its probably only good for kids but hey, im not going to buy a $30 piece of wood for the first try when i have alot of pine lying around :P
    Next stop “how to make an arrow” even though it probably wont sire far…
    Thanks again!

  • 18 Longbowman begginer // Apr 14, 2008 at 7:14 pm

    hey, i have a question:
    about how much will all this equipment cost? because i am doing a school project called the renaissance fair, and my part is to be a longbowman from the renaissance time. the teacher instructed us to not spend more than a few $ on this, so how do i do this without spending a whole ton of money?? pleaase email me anyone before the date of 5/3 at sywalker456@yahoo.com if you have any help with this problem…THANK YOU!!!

  • 19 Longbowman begginer // Apr 14, 2008 at 7:15 pm

    :shock: :shock: aww dang, this project is gonna kill me….

  • 20 shop student // Apr 21, 2008 at 11:38 am

    dude that helps thanx

  • 21 nickoy // Apr 26, 2008 at 7:49 am

    can you show me how to make a survival with out the machine

  • 22 someone // Apr 30, 2008 at 9:09 am

    thats cool

  • 23 bowman // Apr 30, 2008 at 9:11 am

    sweeeeeettttt i loved it dudes

  • 24 Nobody // May 5, 2008 at 5:23 pm

    Some stuff I didn’t relize you had to do! The best bow I made was a long bow made of maple. I discovered that if you cut the maple into a long piece 1/4” long add a handle string it it makes a pretty good bow. The only setback is that it breaks if drawn back too far. I think now my next bow won’t break. Nice!!!!!!!!!!!!!!

  • 25 stu // May 7, 2008 at 12:55 pm

    i’ve made a bow out of silver birch- it works fine but only when it’s made fresh

  • 26 knightnday // May 16, 2008 at 1:06 am

    cool but how do u make the arrow properly

  • 27 Christian Park // May 16, 2008 at 3:48 pm

    I’m going to make one later. :grin: and how do you make an arrow now

  • 28 The Hunter // May 17, 2008 at 3:24 pm

    I’ve tried making bows from pine, oak, redtip, and thick grapevine. I find that grapevine works the best and I have a lot of it, as I live in North Carolina

  • 29 Anonymous // May 18, 2008 at 6:27 am

    :idea:

  • 30 willow tree // May 21, 2008 at 4:12 pm

    this site rocks :razz: :razz: but could use more pictures :oops: :oops:

  • 31 Anonymous // May 25, 2008 at 3:28 pm

    :grin:

  • 32 Anonymous // Jul 1, 2008 at 1:59 pm

    cool :mrgreen: :neutral: :twisted: :arrow: :shock: :smile: :???: :cool: :evil: :grin: :idea: :oops: :razz: :roll: :wink: :cry: :eek: :lol: :mad: :sad: :!: :?:

  • 33 Doug // Jul 17, 2008 at 2:37 pm

    If there is anyone here who has read and put these instructions to the test and would like to do a little teaching of their own, contact me. Especially if you live in or near Evansville, Indiana. If you live out side the local area and are still interested in explaining this a little more, feel free to contact me.

    Thanks,
    Doug

  • 34 Anonymous // Jul 29, 2008 at 8:27 am

    :mrgreen: that was awsome

  • 35 nofear // Aug 18, 2008 at 7:35 am

    : :razz: :superb superb superb superb

  • 36 Alan // Aug 19, 2008 at 10:07 am

    From the land of the ancient bowmen, thanks for you informative document I have a suitable length of yew and will give it a try. Regards from the home of the noble art.

  • 37 Will // Aug 28, 2008 at 3:48 pm

    cool, no wonder the bow i made didnt work.-it was long bow made from some tree in my neighbors back yard.i nailed two nails into the end of both side, and strung it with some crapy string in my house.

  • 38 Young Season // Sep 6, 2008 at 4:59 am

    Im also doing a school project..its also about archery and we have to make a longbow.We are doing sumtin bout the olympics history of archery. Im in South Africa and gettin da materials is goin to be dificult, can any one help.please send help to: Arsenboy@gmail.com :mrgreen:

  • 39 mat // Nov 1, 2008 at 7:10 pm

    awsome

  • 40 Anonymous // Nov 5, 2008 at 10:36 pm

    :neutral: :shock: :roll: :oops: :grin: :evil: :cool: sic :lol: :mad: :eek:

  • 41 Wicked How-To’s // Nov 25, 2008 at 11:55 pm

    ahhahahahah

  • 42 Anonymous // Nov 28, 2008 at 9:30 pm

    Nice

  • 43 billy bob // Nov 30, 2008 at 8:00 am

    now that compound bow looks good for a stick

  • 44 GANJA // Dec 23, 2008 at 5:07 pm

    :shock: I just took delivery of an 82 1/2″ stave +string not knowing it to be a kit ! Panic ! I have read your rather good (British understatement) description of a way to approach the task in hand and I find my self highly motivated and excited ! Bring it on, you`re the man! (That was my attempt at sounding mid-Atlantic). Seriously,good article.

  • 45 Anonymous // Jan 12, 2009 at 6:05 pm

    use a hockey stick handle (ash)

  • 46 Woodsman // Jan 29, 2009 at 1:08 pm

    It’d be nice if you made a guide that explained how you would go about doing this with only basic materials.

    I don’t know about anyone else but I’m interested in bow making to enhance my survival skills.

    Trapping is less consuming of energy, but you’re not guarenteed to even have an animal use the trapped trail.

    Whereas with a survival bow I could move to better spots throughout a given day.

  • 47 Dude 98 // Feb 14, 2009 at 4:43 pm

    Awesome :smile: :smile: :lol: :wink: :!: :!:

  • 48 TEEN ON LOW SUPPLY // Feb 15, 2009 at 10:52 pm

    I live on the island of st.croix and all i got is a rusty saw, matchete, and unknown types of wood. Last time I tried to make a bow it worked out poorly ( i think it was beacuse i strung it with a fishing line :neutral: ) if anyone can help me figure out how to identify the good types of wood to use i would really be grateful. element.200@hotmail.com

  • 49 temugin // Mar 6, 2009 at 6:40 am

    i added sinew to the front of the bow and then it had a 80 lb drawback

  • 50 temugin // Mar 6, 2009 at 6:42 am

    :mad: :lol: or you can add horn to the back as the mongols did and there bows had 266kg (or 125lb) draw backs :smile: :mrgreen: :roll: :razz: :idea:

  • 51 ranger akren // Mar 12, 2009 at 9:59 am

    hey i read ppl r looking for arrow making techniques it ez all u need is feathers, electrical tape(just looks better if black) u choice of a head like a nail or sergiacal razor blade or w.e u want. and last but not least a straight peice of river cane, it kinda looks like bamboo n its golden in the fall (best time to get them) and they have a large fuzzy top like a scared raccoon lol. used the bottom halves of the cane they r stronger, clean off the leaves aroudn the stock carefuck u can get a good cuts from them. now u have a striaght shaft the tiny little ridges wont matter they r ok, use the strongest end for the feathers cause it wil have to get hit by ur bowstring. from the very back end come up about 1/2″ from the last segement like this ===\= cut out the edges of the shaft at the end to its open enough to place the string of ur bow into. use about 2″ of tape around the back so it looks like ==++= (the + r tape). now u take ur feathers any tpye works the fxxy down feathers from a chicken that r wide work same with the finger feathers n the tail feathers do 2. if ur using finger feathers take the lead edge of the feather off (the smaller side) work from the point of the feather leave a bit so its a rounded end( it will help to make the arrow spin on launch) split it down to the end of the feather hollow, with tape secure the hollows to the shaft close to the end (about 3 – 5″) make sure they r standing off the shaft, now secure the center of the feathers with fishing line( not glue they can b unsed over again if the shaft is broken). same for the fuzzy feathers but use glue these need it just a dab in the center (super glue works best) now u have a shaft with 3 feather flights on it bgo to the tip end from about 4-6″ from the end start with ur tape go to the end add ur tip tape it in to place then go around it again to add a bit more strenght it will help cause they r light. now u have arrows nice eh. i put bands around my arrows so i know who’s is who’s cayuse you will always see ppl with the same colours as u no matter what. when u mak ur shafter mare sure it starts n ends on a notch like so =\==\==\==\==\==\= happy shooting. :mrgreen:

  • 52 thisguy // Mar 12, 2009 at 2:32 pm

    perfecto hombre, this will work. but do you need a permit :?:

  • 53 Chase // Mar 31, 2009 at 1:14 pm

    hi, i am chase spracklin. I make bows and arrows the best one i made was from yew wood and is about 5 feet tall with 3 strands of black sinew wrapped around each other. and for the arrows i use 3 foot arrows with sea gull feathers. and i also use 2 and 1/2 inch arrowheads i make myself. and i am only 10 years old but if you want to find a master ask my dad.

  • 54 Anonymous // Apr 11, 2009 at 6:19 pm

    cant wait to make one thanks fir the info :arrow: :grin:

  • 55 Anonymous // Apr 19, 2009 at 1:23 pm

    orly?

  • 56 Andrew // Apr 19, 2009 at 8:45 pm

    Yes, really.

  • 57 Anonymous // May 4, 2009 at 1:26 am

    :???: :?: :!:

  • 58 Anonymous // May 8, 2009 at 12:44 pm

    hye help me out if u got a good vidio of this stuff send it 2 me man(or woman) kuz i have 2 c a visual 2 get it u no ? haha but mr arrow man up there has good arrow ideaz so yea ….email that vid. at …dhawotte@live.com

  • 59 devon // May 8, 2009 at 12:46 pm

    :cool: haha help me out i need a vid ….i gatta have visual 2 fully understand this but yea who ever had those river cane arrows theyy rock haha but yea send me a vid 2 dhawotte@live.com

  • 60 Anonymous // May 30, 2009 at 11:20 pm

    not bad

  • 61 bowyer13 // Aug 11, 2009 at 2:00 am

    these instructions are very acurete my bow will soon be finished and this time I didn’t need a backing strip. U see I usualy took the sap wood right off and used a baking strip, and alsow had no idia about teaching the wood 2 bend

  • 62 frank // Sep 8, 2009 at 8:25 am

    pity, heavily oversimplified.

    And what about the horse bow and the flat bow?

  • 63 Anonymous // Sep 21, 2009 at 2:45 pm

    frank, you’re a dumbass, shut the $@*^ up.

    Great site, thanks for the info. Only site that gave professional instructions.

  • 64 hunter // Nov 30, 2009 at 6:53 pm

    :shock: how do you make it so it doesnt snap ive made them thikker and ive slimmed them down a bit but they all snap darnet

  • 65 Old Recurve Shooter // Dec 1, 2009 at 11:56 pm

    Hi, From what I read making and hunting with a long bow would be interesting, I think I’ll try it. My Ben Pearson Brush bow is over 25 yrs old and now getting harder to use at 63 but was easy at 18 yrs old. Thanks for all the info.

  • 66 Kyle // Dec 14, 2009 at 6:13 pm

    here is my question. Can you buy the wood from a store like home depot or such to make your stave. would a 2by4 work and just cut it down or a 4by4. cause were i live we have no trees suitable for makeing anything out of. can anyone help me who has done this already or am i going to have to go buy a kit from bowstick.coom

  • 67 Marie // Jan 2, 2010 at 12:12 pm

    †<— what the hell is that measurement? Is it just my computer or some strange way of writing inches?

    (I'm European. I only understand cm)

  • 68 tom // Jan 4, 2010 at 11:13 am

    I recently purchased hickory staves to make a longbow. The bark was still on. Under the bark there is a layer of white wood . Is this sap wood? Do I remove it before making the bow?
    thanks

  • 69 confidential // Mar 28, 2010 at 9:07 pm

    would desert willow work considering there’s a crap load of that around my house first bow i made is ok but i used different method ill try this method next. this will probably produce a better bow than what imade. a tool i would suggest getting is the multitool

  • 70 David // May 2, 2010 at 6:16 am

    Best instructions yet found. I live in the central \patagonian Andes and there are no real hard woods here. There are cherry and birch brought in years ago. Which is better for the long or recurve do you think?

  • 71 DiGi // May 2, 2010 at 10:56 pm

    What are the best woods to use? Do they have to be fresh or can they be from a lumber store? How thick should the stave be? How tall should the stave be? Where do you get the bow string? How do you tell the draw weight?
    Thanks

  • 72 How To Make A Recurve Bow // Jun 4, 2010 at 4:39 am

    […] ← How To Build A Long Bow–Make Your Own English Longbow at Home How To Write a Letter of Recommendation (Reference Letter) […]

  • 73 nasredin // Jun 27, 2010 at 12:40 am

    Good day all
    I need diamentions for steel bow (250 lb ) and easy way to make a trigger.
    Please help me if you do not mind.
    Thanks

  • 74 Payo // Jul 8, 2010 at 11:24 pm

    Hi I made a longbow as per the instructions above out of mulberry. At first it was too strong at the above dimensions, draw strength was 180 lb.
    I started with a limb 2.25 ins. thick,I couldn’t split it, I had to saw it. I just kept shaving it to a usable strength. The old English records show mulberry as being second choice to Yew.
    Hope this helps.

  • 75 no 1 // Aug 14, 2010 at 8:58 pm

    good good good good good!!!!!!!!!!!!!!! :o :o :o :o :o :o :o :o :o :o :o

  • 76 efficient way to make a longbow? | Bow Construction Center // Aug 26, 2010 at 1:11 pm

    […] Here is a good site about bows and how to make them, written simply with no big technical stuff. http://wickedhowtos.com/index.php/2007/08/26/how-to-build-a-long-bow/ . . . . . . . http://www.questions-answered.org/how-to-make-a-longbow/?page_id=2 . . . . . .. There […]

  • 77 rexdoy // Jan 18, 2011 at 2:22 am

    awesome but to long :oops:

  • 78 Jonathon // Feb 28, 2011 at 5:30 pm

    what are the best dimensions for making a tiller?
    Ideally a detailed schematic for making a reliable tiller with the notches at the right position, i assume that it has to be as long as your draw length plus 6″ but some clarification would be appreciated. Thanks for posting this, i cant wait to start on my first (proper) bow.

  • 79 HuntressofArtemis // Apr 1, 2011 at 7:19 pm

    I have a question: does your height make a difference with the size of the longbow From above? Caus im kinda tall and im considering making one.
    (ps: for those who wondered, Artemis is the godess of the Hunt in the greek legends, and with her twin brother, Apollo, they make the legendary Twin Archers)

  • 80 Arrush // Apr 2, 2011 at 3:35 pm

    yes height does make a difference. the typical archer in the 100 years war was around 5’10” to 6’1”. the average bow was 6 foot, as half of the stave is held above the body, and half below. also, you can have a smaller bow but it will be harder to get a full draw length as at a full to-the-chin draw the bow is liable to snap. this is why most archers were tall, so that they were able to weild and accurately use a tall 6 foot bow with max power. another factor is also seasoning and wood. im no expert but to my knowledge some bows had less poundage because they were made of more supple wood, while another bow of the same size has a heavier draw because of the type of wood.

  • 81 The Amatuer Bowyer // Jun 8, 2011 at 4:12 pm

    Lilac wood is very good for bows. It is very strong and has a lot of pullback.

  • 82 The Amatuer Bowyer // Jun 8, 2011 at 4:17 pm

    BTW, no permit is required to make bows, knives, spears or slingshots, but there is a permit required to manufacture and/or own a Crossbow.

  • 83 James // Feb 15, 2012 at 12:18 am

    Can I get a bit more detailed diagram of the notches for the string on the bow? Thanks.

  • 84 Matt // Mar 17, 2012 at 8:46 am

    Man you bet i want to make one of theese Babys ;)

  • 85 john // Mar 22, 2012 at 1:40 pm

    is the poundage proportional to the power of the bow – the higher the poundage the stronger the bow?

  • 86 jason // Apr 28, 2012 at 11:36 am

    which side must the heart/core wood be on – the back or the belly?

  • 87 Correia // Jul 22, 2012 at 5:20 am

    Hi.
    I have made my self several long bows (4) and a couple of recurve bows (3); still trying woods ande methods. I love bows like they were made in the ancient times, so mines are all constructed with natural materials, I don’t buy the wood, I get in the nature.
    Have already tryied a wood that’s very easy to find in nature (I’m from Portugal) and easealy to get a straight stave (it’s crucial) – eucaliptus – and it works very well – I can asure you guys.
    My stronghets longbow has 35 quilograms (= 77 pounds) draw power, and can throw a arrow up to 150/180 meters (=164/196 Yards) (arrows made by myself witnh wood, chiken feathers (are the ones I can get) and points of iron (are extremely dangerous). A lot of caution it’s needed.
    To draw and point correctly, it’s needed training. I do this for several years and find my self as a got shoter at the moment. On the medieval fairs I have been only find a very few people that could shoot like me or better.
    See you guys. Nice constructions. You only need is practice, practice and pratice.

  • 88 Hugh "Bear" Kombi // Aug 4, 2012 at 6:01 am

    Very Useful. I´ve made my own bows and arrows for over 40 years and enjoyed your post and got new good tips. Always learning means you keep living. Thanks Man.

  • 89 Patrick Robertson // Aug 30, 2012 at 10:22 pm

    looks good!!!

  • 90 Patrick Robertson // Aug 30, 2012 at 10:24 pm

    Thanks 4 an exciting visual experience.

© 2006–2007 Wicked How-To's — SitemapCutline by Chris Pearson

css.php